10 Easy DIY Corner Cabinet Ideas with Plans

Last updated on October 21, 2022

Here are 10 different ways to build a corner cabinet, including detailed instructions and plans.

Building a corner cabinet can be a great way to add extra storage and display space to your home. These DIY tutorials can help you build your own corner cabinet step-by-step.

The most difficult part of building a corner cabinet is usually cutting the shelves (which requires a table saw). However, once the shelves are cut, the rest of the project is relatively easy to complete.

These tutorials walk you through the entire process of building a corner cabinet, from start to finish. They include detailed instructions and photos so you can see exactly what you need to do at each step.

Corner Cupboard by Ana White

ana-white.com diy corner cabinets

Tutorial: ana-white.com

Supplies:

  • 1×4 lumber
  • 1×6 lumber
  • table saw
  • drill
  • screws
  • paint or stain
  • polyurethane

This project is a great way to add storage and display space to an empty corner in your home. It is cleverly designed to minimize board waste and to be easy to build.

The most difficult part of this project is cutting the shelves, which requires a table saw. However, once the shelves are cut, the rest of the project is relatively easy to complete.

DIY Corner Cabinet by Sawson Skates

sawsonskates.com diy corner cabinets

Tutorial: sawsonskates.com

Expected cost: This project will cost around $100 to complete, depending on the cost of the wood and paint

Supplies:

  • saw
  • wood
  • paint
  • screws
  • hammer

This project is a bit more difficult than some of the others, but it is still manageable for most people. It involves cutting wood, assembling the cabinet, and then painting it.

The most difficult part is probably cutting the angles for the corners, but as long as you have a good saw and measure carefully, it shouldn’t be too hard.

Corner Cabinets with Raised Panel Doors

woodshopmike.com diy corner cabinets

Tutorial: woodshopmike.com

Supplies:

  • Tape measure
  • Plywood
  • Circular saw
  • High-grit sandpaper
  • Stiles
  • Construction adhesive
  • Cordless drill
  • 1 inch hole saw
  • Paint or stain
  • Cabinet hardware
  • Glass

This project is a bit more difficult than some of the others, but it is still doable for most people. It involves building a carcass for the corner cabinets, making and installing a drawer, making and installing raised panel doors, and then finally installing the glass in the cabinet doors.

Corner Cabinet for the Kitchen

ibuildit.ca diy corner cabinets

Tutorial: ibuildit.ca

Supplies:

  • Tape measure
  • Circular saw
  • Plywood
  • Wood glue
  • Cordless drill
  • 1 inch hole saw
  • Paint or stain
  • Lumber (for frame and shelves)
  • Cabinet hardware

This project is a bit more complex than your average kitchen cabinet, but it can be completed with fairly basic shop tools. It will take some time to cut out all the pieces and assemble the cabinet, but it is well worth the effort.

DIY Corner Cabinet by wikiHow

wikihow.com diy corner cabinets

Tutorial: wikihow.com

Expected cost: This project will cost around $200 to complete.

Supplies:

  • 1/2″ plywood
  • 1×2 lumber
  • 1×4 lumber
  • Cabinet hardware
  • Paint or stain
  • Wood glue
  • Nails or screws
  • Saw
  • Drill
  • Measuring tape
  • Level
  • Square
  • Chalk line

This project is a bit more difficult than some of the others on this list, but it’s still doable for most people. It will take some time and patience to complete, but the end result will be worth it.

You’ll need some basic woodworking skills and tools to build this cabinet, so if you’re not confident in your abilities, it might be best to ask for help from someone who is.

Convert a Base Cabinet to a Blind Corner Cabinet

makeitwithkate.com diy corner cabinets

Tutorial: makeitwithkate.com

Supplies:

  • Base cabinet
  • Cabinet doors
  • Cabinet hardware
  • Screws
  • drill
  • saw

This project is a bit more difficult than some of the others, but it is still doable for most people. It involves converting a base cabinet into a blind corner cabinet, which can be tricky.

However, with some careful planning and execution, it can be done relatively easily.

How to Build Corner Cabinets with Raised Panel Doors by Kreg Tool

learn.kregtool.com diy corner cabinets

Tutorial: learn.kregtool.com

Expected cost: The cost of this project will vary depending on the materials you use. Expect to spend around $

Supplies:

  • Tape measure
  • Circular saw
  • Miter saw
  • Router
  • 1/4″ router bit
  • 1/2″ router bit
  • 3/4″ router bit
  • 1″ router bit
  • 1 1/2″ hole saw
  • 2″ hole saw
  • Plywood
  • Solid wood
  • Glass
  • Cabinet hardware
  • Wood glue
  • Wood screws
  • Sandpaper
  • Stain

This project entails building custom corner cabinets with solid wood raised panel doors for the base cabinet and glass insert doors for the wall cabinet. It is a moderately difficult project that requires some experience with woodworking tools and techniques.

Classic Corner Cabinet by Woodsmith Plans

woodsmithplans.com diy corner cabinets

Tutorial: woodsmithplans.com

Supplies:

  • Plywood
  • Poplar
  • Jointing tools
  • Banding saw
  • Router
  • Circular saw
  • Drill
  • Sander
  • Stain or paint

This project is a classic corner cabinet that can be used for storage and display. It is made from inexpensive plywood and poplar, and features a few unique joinery techniques.

The project is straightforward and easy to complete, making it a great choice for beginners.

DIY Blind Corner Storage Solution

addicted2decorating.com diy corner cabinets

Tutorial: addicted2decorating.com

Supplies:

  • 1/2″ plywood
  • 1×2 lumber
  • Drawer slides
  • Cabinet hardware
  • Wood glue
  • Wood screws
  • Paint or stain

This project involves building a custom storage solution for a blind corner cabinet. It is not difficult to build, but it does require some basic woodworking skills and knowledge of drawer slides.

DIY Farmhouse Corner Cabinet

delightfullynotedblog.com diy corner cabinets

Tutorial: delightfullynotedblog.com

Expected cost: This project should cost less than $20 to complete.

Supplies:

  • 1/4 inch plywood
  • 1×2 lumber
  • screws
  • drill
  • saw

This is a simple DIY project that anyone can do. It’s a great way to add some extra storage to your home, and it’s perfect for small spaces.

Recap

Liked this article? Here's what you can read next: